1 / 1
Ender 3 PSU Cover to replace fan with 120mm or 80mm PC fan. — zdjęcie 1

Ender 3 PSU Cover to replace fan with 120mm or 80mm PC fan.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replace normal Ender 3 PSU with a quieter 120mm or 80mm fan.

Ocena
0 / 5
Polubienia
6
Pobrania
47
Wydruki
0
Wyświetlenia
594
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A cover for Ender 3 pro power supply (Meanwell PSU) which allows using a much quieter standard 120mm (or smaller) computer fan.

Instead of a small high rpm 80mm fan we can use a large low rpm PC fan making the PSU virtually silent.

Changes to the original:

  • thinner (1.2mm - 4 layers @ 0.3mm) - it doesn't need to be strong and it prints twice as fast

  • replaced threaded inserts with holes sized to fit M3 screws directly

  • reduced width at the bottom since it didn't fit into the Ender 3 housing

Also includes adapter for 80mm fan, which is quiet enough (and it turned out I didn't actually have 120mm on hand)

Photo shows previous version that i had to cut down at the bottom.

Tagi