HP DL380 power supply conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recycle an old HP DL380 G2 server power supply into a bench/hobby power supply.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Recycle an old HP DL380 G2 server power supply into a bench/hobby power supply.
Instructions
After modifying your recycled power supply to be always on, just print, wire up female bullet jacks, and you have a tidy looking 12V 32A power supply. Hold the 4mm bullet females in with set screws or hot glue.
My 4mm connectors had an outside dimension of 5mm w/ a 5.5mm shoulder.
I've created an additional version for people with 4.75mm connectors without a shoulder(much more common)
4mm M/F sets are available at any online or local R/C hobby store
Both version have an outer lip that should retain the outer edge of any 4mm connector.
Keep wire length to a minimum to avoid fan contact.
Fits HP DL380 Generation 2(ESP113) possibly others.
Mod info http://www.rcgroups.com/forums/showthread.php?t=358340
For a stand to hold your battery charger on this power supply http://www.thingiverse.com/thing:29298
Category: R/C Vehicles