Screwie - a handy bit driver from an old Sharpie Marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handy bit driver from an old Sharpie marker. Repurpose an end-of-life marker into a super useful tool.
- Ocena
- 5 / 5
- Polubienia
- 301
- Pobrania
- 389
- Wydruki
- 7
- Wyświetlenia
- 3302
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Bring a used-up Sharpie marker back to life as a handy bit driver.
Two different model files - one for typical ¼" bits, a second for 4mm electronics bits.
Bit is held securely by a 6mm diameter by 3mm thick neodymium magnet printed in place.
A small collar appears between the cap and body to let you know this isn't just an ordinary Sharpie. You can also drill a hole in the cap to make it easy to see the bit at a glance.
Prints well with:
- 0.15mm layers
- Print Settings - Advanced - Seam position: [Random]
- Print Settings - Advanced - Fill gaps: [off]
Insert a pause in your G-code at 22.7mm to insert a 6mm diameter by 3mm thick magnet.
If you need to adjust the fit, I suggest adjusting the extruder flow slightly on your machine.
Hope you find it useful!
Inspired by https://www.printables.com/model/253567-x-acto-knife-sharpie-adaptor
Designed in Solidworks for Makers.