1/2" PVC to dumbbell conversion kit (lock jaw collar and inner collet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lock Jaw collar and inner collet for Half Inch PVC for use as a dumbbell For the lock jaw you're going to need...…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 150
- Wydruki
- 1
- Wyświetlenia
- 1418
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Lock Jaw collar and inner collet for Half Inch PVC for use as a dumbbell
For the lock jaw you're going to need...
M3x20mm bolts x 3
M3 nuts x3
1 pin that is about 3mm dia x 20mm (I used a scrap steel pin wrapped in tape to get a tight fit)
duct tape/electrical tape (for pads for extra grip)
For the pads I used two little squares of double layered duct tape. Could use more layers if you need to for a better clamp
For the inner collets you're going to need...
M4x15mm bolts x2
M4 nuts x2
Duct tape for inner faces for extra grip
Category: Gadgets