Upside-Down Magic Dritten
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dragon kitten hybrid from the Upside-Down Magic series.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 218
- Wydruki
- 5
- Wyświetlenia
- 814
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
The first thing my daughter asked for when I got a 3d printer was a dritten. Unfortunately, I didn't find one anywhere. After getting things set up and doing some prints, I decided it was time to try to make one.
I found some good starting points with the Kitten and Figment so all I really had to do was stick the wings into the kitten and keep messing with angles until I could get one to print reliably.
I used Tree supports in Cura to be safe, but it might be ok with good calibration and minimal or no supports. The version I posted was printed at 66% scale to reduce the time.
My example
Polyterra PLA
Tree supports
0.12 layer height