2" Dimple Die
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a need for a Dimple Die, but could not justify the cost for a one time project. So I set out to print one. After…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 1529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a need for a Dimple Die, but could not justify the cost for a one time project. So I set out to print one. After finding some design guidelines I made this.
Sadly the design did not turn out the way I wanted, And I did not really notice until after it was printed. So the die had sat around for awhile.
after experimenting with the 3d printed press brake die, I tried out the dimple die just to see how well it work, and look.
I was happy to see it worked as a 2" dimple die, and with a slightly smaller main hole, a different profile was achieved. so while the design is not ideal, it does work and proves that carbon Fiber Nylon is strong enough for tooling
all holes where pre-punched in 16g mild steel with a Greenlee Slug buster
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
100
Filament: 3d Solutech Carbon Fiber Nylon Black
Notes:
Make sure to use a harden nozzle.
Category: Tools