Press Brake Goose Neck Die #43
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently picked up the SWAG Offroad 20 ton heavy duty finger brake. and one of the things about 3d printing that I…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 1154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently picked up the SWAG Offroad 20 ton heavy duty finger brake. and one of the things about 3d printing that I find most interesting is the ability to create durable items reasonably quick. The iterative design process, and the ability to make custom tools and parts
So, After seeing what others have done with 3d printing press tooling, I knew I had to try my hand at it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.4mm
Infill:
90%
Filament: HATCHBOX PLA Black
Notes:
Extruder temp 210
Bed Temp 60
Speed 175
Post-Printing
Print failed aftter 4 bends in 1/8" mild steel. I suspect this is partly due to a filament change at the end of the print, an increase in print speed But most importantly, the angle being off, causing extreme stress on the die at the 45 Deg stopping point
Faster you fail, the faster you succeed
This will need some redesign, to fit the angle iron bottom Die that comes on the SWAG Offroad finger brake. along with some more experimenting with print settings.
Failure, happen at the top skin layers, and That was about the time I had to change filamentHow I Designed This
Designed in Inventor 2020, based off what appears to be an industry standard #43 gooseneck die for 10g sheet metal
Category: Machine Tools