Simple, but rugged Airtag holder for Suitcase, Keyring (spill protect, but not perfect watertight), Version 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple, but rugged Airtag holder that the airtag is not seen as such immediately.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 284
- Wydruki
- 3
- Wyświetlenia
- 1673
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
V2: Improved hold on Keyring-edge
I wanted a rugged Airtag Holder for using my airtags for travelling, in Handbag and on Car-Key. And as a “Position-Reporter” for my mobile home but not immeditely indientifiable as an Airtag.
Version 2 has a larger middle-ring and there are two additional screws-holes for 2mm self tapping screws pressing the keyring-edge together, making it more spill-water-protected.
Beautifullness was still not a design goal: ;-)
I printed with PLA. Used it on flight, in Handybag and on Keyring.
Just spill-water-Protection, but not really watertight.
Used : 3 x Screws M3 x 8mm, 3 Nuts M3, 2 Screws M2 * 8mm, self tapping
(I ued a larger M3 Screw to pull the Nuts in Position, before i fixed them with M3 x8 mm, I printed it transparent only for this picture, if you print it with color, the Airtag is not seen.)
Have fun