1 / 3
Ohmni Bot Wheelie Bar: prevents your telepresence robot from face planting — zdjęcie 1
1 / 3

Ohmni Bot Wheelie Bar: prevents your telepresence robot from face planting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ohmni Bot telepresence robots from OhmniLabs are really useful little robots for letting people visit physical spaced…

Ocena
0 / 5
Polubienia
4
Pobrania
10
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Ohmni Bot telepresence robots from OhmniLabs are really useful little robots for letting people visit physical spaced virtually, but they also are highly prone to tipping over and breaking when they back into tables.

These wheelie bars prevent this by lifting the drive wheels off the ground if the robot starts to tip forward.

Just print these parts and hot glue them over the motor module on each side. The bar will sit just ahead of the wheel and about half an inch off the ground.

Print in PLA with no supports; rafts suggested but not required.

Category: Robotics

Tagi