cover for victron shunt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
cover for victron shunt
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 379
- Wydruki
- 1
- Wyświetlenia
- 2647
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cover for the victron shunt. I didn't like the openness, so I designed the cover. As Material I used PETg. No special print instructions …
Please note: this cover is flush with the contacts of the shunt, do NOT use washers UNDER the lug!
If you want a cover for the terminals, please look my other model: https://www.printables.com/model/307494-victron-shunt-terminal-cap
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.