support for tomtom or phone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
support for tomtom xl, with module to use as an alternative also any type of mobile phone
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 849
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
support for tomtom xl, with module to use as an alternative also any type of mobile phone, designed and printed for a friend with a Bmw GS motorcycle but I think it can also go for other motorcycles that have a tubular between 11 and 13 mm in diameter
The blue rectangles are simple tpu gaskets to avoid damaging the accessory bar where the support is mounted. You can replace them with simple rubber rectangles of about o, 2 mm
Obviously, for the safety of the seal, 4 6x45 or 6x 40 round head bolts and relative hexagonal nuts are required, which are easily found in hardware stores or DIY stores.
I recommend a little glue or better superglue on the thread of "ball_1" before screwing it on "hook" AFTER INSERTING "Screw_r_1" obviously. This post-assembly procedure makes it easy to print in split pieces.