Mobula 7 HD 1S larger battery clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits 18mm width by 8mm thick batteries (most 500-650mah 1S stick batteries)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Bought some batteries that were mislabeled in the specs and they were too big to fit into the regular tray. Customer service gave no response so I figured I would try to make it work. The batteries fit snugly into clip (tighter than the frame's tray).
Works out to under 4 grams, there might be some ways to shave weight but I'll have to do more flying to test durability first. The slightly lower center of gravity and weight of the heavier battery makes it take a bit more throttle but ends up more stable (which may be detrimental if you like twitchy freestyle flying).
Printed with 0.3mm layer height and a 0.6mm nozzle in Overture gray blue PLA.