Märklin 4503 Replacement Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upper shell for the common Märklin H0 metal frame used in many models until the 70s. This is meant as a replacement…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 1136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Upper shell for the commonMärklin H0 metal frame used in many models until the 70s. This is meant as a replacement for the upper part of flatcar Märklin 4503 of typeX 05 Klms.
The shell has only RIV markings and flat surfaces for signage, so it could be adapted for any European Railway.
The shell includes studs that fit into the holes of the metal frame, but would need to be glued in place.
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.09
Infill:
25%
Filament: Purefill PLA Nature (brown)
Notes:
As there are protrusions below the frame, this needs supports, cutting them off is finicky has they are difficult to distinguish from the support. I ended up printing it with a 10° angle and supports.