Perlin noise included Raspberry Pi 3 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A raspberry 3 mount with some Perlin noise generated style
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Raspberry 3 Model B mount.
Models created with OpenSCAD, model files also available on Github
The RaspberryMount model is meant to be mounted using screws and the RaspberryDeskMount is measured to fit my table (25mm) as a push to fit piece. Both models use mounting holes that fit M2.5 screws for the Raspberry, the screw holes slightly larger on the actual mount.
Perlin noise data was generated using a program created by Github user “volzotan” (perlin noise generator)
Printed from PETG since I have that available. Printed at 0.20 layer height, no supports required when printed on the side that doesn't have the sd card slot.