Modified Bottle Opener with Magnet - Fusion 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to add a 10x5mm magnet and use an M5x10 flat washer for the opener.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This Thing was remixed to add a 10x5mm magnet and use an M5x10 flat washer for the opener. I also increased the thickness a bit to better accommodate the larger diameter magnet and modified the bottle cap area to better fit my beer of choice. After working with the step file provided by Dyason (thanks for that), I ended up redrawing the part from scratch in Fusion 360 since I sometimes find that easier than working with original files from other CAD software. Fusion 360 file included.
Files updated 3/27/2022
Print Settings
Printer:
Railcore II 300XL
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
15%
Filament:
Zyltech PETG
Blue
Category: Kitchen & Dining