Bosch 1617 Dust Boot with Air Diverter for CNC Router Fusion 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust boot for Bosch 1617 router with air diverter and magnetic dust ring. 4" and 3" vacuum hose adapters are included.…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dust boot for Bosch 1617 router with air diverter and magnetic dust ring. 4" and 3" vacuum hose adapters are included.
The air diverter (center section) can be omitted if not needed. In that case, use M6x16mm bolts instead of the M6x35mm listed below.
This project was created in a hurry so the Fusion timeline is probably a mess. I never had time to go back and clean it up. If you have any questions, please leave a comment.
Fusion 360 archive and STEP files are in the download package.
Parts required:
10 x 5mm magnets - Qty 4
M5 x 15mm Socket Head Cap Screws - Qty 8 https://www.mcmaster.com/products/bolts/alloy-steel-socket-head-screws-8/length~15mm/?s=m5+bolts
M6 x 35mm Socket Head Cap Screws - Qty 4 https://www.mcmaster.com/catalog/129/3495/96144A135?s=m6+bolts
7/32" Wide x 3/16" High Backing Brush Strip. I used the 3" version but you may find 2" works for you. https://www.mcmaster.com/catalog/129/1551/7900T2
Hose Clamp 1/2" Band Width, 2-13/16" to 3-3/4" Clamp ID. https://www.mcmaster.com/catalog/129/330/5415K25
I added McMaster Carr links for the bolts just for reference. I'm sure you can find them much cheaper on Amazon or other online retailers.
Print Settings
Printer:
Railcore II Custom
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
15%
Filament:
Sunlu PLA+
Category: Machine Tools