HE3D EI3 Dual wide vent mount (fit V6 blocks)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently purchased some V6-style heat blocks (with the cartridge thermistor) for my HE3D EI3 Dual, and the fan ducts…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I recently purchased some V6-style heat blocks (with the cartridge thermistor) for my HE3D EI3 Dual, and the fan ducts would no longer fit. This bracket is based on the original except the holes are moved out 5mm in each direction to accommodate the thermistor cartridge wiring.
To make the heat vents, print this bracket but print the original ducts from the remixed part.
Note: DO NOT USE PLA! I tried to use PLA in my first attempt, then the bracket got warm and deformed.
FreeCAD file included for easy modification.
Print Settings
Printer:
HE3D EI3 Dual
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
15%
Filament:
Sunlu PETG
Black
Notes:
I have not run the printer enough yet to determine if PETG has a high enough glass transition temperature to avoid warping from the heat radiated from the heater blocks.
Install the vent ducts from https://www.thingiverse.com/thing:2590114
Category: 3D Printer Parts