Prusa RC3 + Slim Face Shield punching aid (8-6-8cm & 8-8-8cm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for people like me, very bad in aligning things, this might ease your situation - a Prusa RC3 face shield punching…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
for people like me, very bad in aligning things, this might ease your situation - a Prusa RC3 face shield punching jig!
Place your hole-punch in the frame (done for a LEITZ 5008 - quite common in Germany...) and align your foils on the left and punch the holes for a RC2 or SLIM face shield!
Much easier than aligning every single foil with a ruler or template - tested with 5, but more should be possible
Size: DIN-A4, 8 - 6 - 8cm steps to match 3D printed frames
Update 20-04-2020:
added variant to punch 8-8-8cm grid in same frame - just flip hole punch - foil size remains DIN-A4
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,4mm layer height, 0,8 nozzle
Infill:
10%
Filament: Nothing special... PLA, PETG, ABS, ... n/a
Notes:
take whatever you like - does not need to resist any kind of mechanical stress - just to help aligning foils to the punch
Category: Tools