1 / 3
Ikea Tradfri Remote round wall mount — zdjęcie 1
1 / 3

Ikea Tradfri Remote round wall mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Missed to check out Thingiverse for a suitable wall mount for the IKEA Tradfri remote, so I designed my own a couple…

Ocena
0 / 5
Polubienia
3
Pobrania
36
Wydruki
0
Wyświetlenia
541
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Missed to check out Thingiverse for a suitable wall mount for the IKEA Tradfri remote, so I designed my own a couple of days ago... better looking next time! ;)

Designed asround shape for stand-alone application as shown on the picture

Print Settings

Printer Brand:

Anycubic

Printer:

Large Size Chiron

Rafts:

No

Supports:

No

Resolution:

0,2mm layer height

Infill:

25%

Filament: Nothing special... PLA like your wall Custom Section ==============

Wall Mount

There's one screw hole underneath the fixation point which cannot be accessed once the Tradfri Remote is glued to the mount - so make sure you've put it on the right position.

**Remark:**

The magnetic cover should have a (very) tight fit when applied to the mount, so fix the mount on the wall first prior applying the cover

Category: Household

Tagi