Flashforge Dreamer Palette 2 PTFE Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 Material mounting bracket to attach the Palette 2 to a FlashForge Dreamer at any extruder (unfortunately, the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
2 Material mounting bracket to attach the Palette 2 to a FlashForge Dreamer at any extruder (unfortunately, the bracket for the Creator Pro did not work...)
Parts attached:
- "Fuss": counter bracket to give more support when adding the PTFE tube for printing
- "Halter": base plate for the backet
- "Gummi x.x": TPU component to stick the PTFE tube in
The "Gummi" part offers several diameters, select the one matching your PTFE tube to make plugging / unplugging more comfortable. Tests with 4.8mm diameter showed a tight fit when plugging in, but almostimpossible to remove the tube again (which is necessary to remove remaining filament after a print):
- FFD Palette Gummi 5.0 ==> 5.0mm diameter
- ... 5.5 ==> 5.5mm diameter
- ... 6.0 ==> 6.0mm diameter
Suggest to print them all and test the fit of the tube prior to installation
"Halter" offers a M4 thread to ease handling and printing of all parts feel free to replace or even remove completely in case your bracket has enough rigidity. Tests with a first version showed the PLA bending over a 6h print
What you need else
Since the modification is an "add-on" to the hotend lid, you'll need to replace the 2 M3x15 screws securing the plastic part on top of the carriage by 2 M3x20 screws.
Category: 3D Printer Accessories