Brennenstuhl Extender Wall Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recently bought a Brennenstuhl Power Plug Extender for my office and encountered the fact, there's only 1 fixing…
- Ocena
- 3 / 5
- Polubienia
- 5
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 463
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Recently bought a Brennenstuhl Power Plug Extender for my office and encountered the fact, there's only 1 fixing bracket for wall mounting. Sh...
So I designed one in Fusion360
here's a link to the extender: https://www.brennenstuhl.com/de-DE/produkte/steckdosenleisten/premium-line-steckdosenleiste-6-fach-weiss-3m-h05vv-f-3g1-5
Pic #3 shows how to apply the adapter - the picture has been taken from the Brennenstuhl website, so all rights belong to them! (link: https://www.brennenstuhl.com/temp/explorer/files/shop_articles/de-DE/images/G299513_Detailansichten_1.jpg)
Print Settings
Printer Brand:
Monoprice
Printer:
Mini Delta
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,2mm
Infill:
50%
Filament: Nothing special... PETG Cheap stuff from Amazon
Notes:
Printed the adapter plate in PETG to get a quite good stiffness and avoid fading when screwed to the wall. Think PLA will work as well - or any other filament you have on hand...
When using the same printer, make sure you're having a good skirt or brim to support the part sticking on the bed, since the MP Delta Mini offers 60°C only...Post-Printing
Deburring the edges might be necessary...
I've printed this on the Monoprice Delta Mini @235°C with 60°C bed and it warped quite a lot since i was not using any skirt or brim to keep the part sticking to the bed. So a lot of deburring was required to get the part fit in the extender.
Category: Office