1 / 3
100mm square and 50mm circle calibration (XY calibration)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple model to measure your printers abilities to make straight corners and round shapes correctly. Square should be…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 312
- Wydruki
- 2
- Wyświetlenia
- 907
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (20)Powiązane
Simple model to measure your printers abilities to make straight corners and round shapes correctly.
Square should be 100mm x 100mm and circle 50mm. Cross-measure should be 141.42mm from opposite corners, if it is straight.
Model is 2mm thick, but you can print only one layer to measure your print.
Category: 3D Printing Tests
