Ender-5 Plus Enhancements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some enhancements I did for the Ender-5 Plus upgrade to direct drive extruder.
- Ocena
- 4,8 / 5
- Polubienia
- 84
- Pobrania
- 1258
- Wydruki
- 7
- Wyświetlenia
- 7514
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Some parts I did for enhancing my Ender-5 Plus when doing the direct drive upgrade.
Cable guide
A fixation for the extruder cables. Needs a M3 x 6 counter sunk screw.
Z-screw fixation
The Z-screw holders need four M4 * 10 countersunk screws and four hammer nuts to go into the V-slots. I updated the design to add a space of 1mm from bottom to the ball-bearing as when the printing bed is at the top position it would push the holder up as Creality wanted to save every inch of the z-screw length (o;
Filament tube holder
As I didn't liked the supplied filament tube holder in the Micro Swiss direct drive kit I decided to quickly do my own as I wanted to lay out the extruder cables at another spot.
Took some trials and errors in the Shapr3D design to finally made it fit (o;
More to come….