1 / 1
Schraubverschluss (screw cap) für Sodastream Crystal Glasflasche — zdjęcie 1

Schraubverschluss (screw cap) für Sodastream Crystal Glasflasche

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ein Ersatz Schraubverschluss für die Soda Stream Crystal Glasflasche A spare screw cap for Soda Stream

Ocena
5 / 5
Polubienia
31
Pobrania
322
Wydruki
1
Wyświetlenia
1417
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Der Verschluss kann als Ersatz für den Original Verschluss eingesetzt werden.

Er ist dabei recht griffig und gut zu drehen.

Es wird empfohlen, ihn in PETG, ABS oder ASA zu drucken, da PLA die Spülmaschine nicht übersteht.

Zusätzlich wird eine O-Ring Dichtung aus Silikon oder Perbunan mit ID 26 x 3,5 mm benötigt.

Gedruckt in PETG mit 100% Infill wiegt er ca 36g

-----------------------------------------------------------------------------------------

The cap can be used as a replacement for the original cap.

It has a good grip and is easy to turn.

It is recommended to print it in PETG, ABS or ASA, as PLA does not survive the dishwasher.

An O-ring seal made of silicone or Perbunan with ID 26 x 3.5 mm is also required.

Printed in PETG with 100% infill it weighs approx. 36g

Tagi