Cable Management with Drag Chain for Micro Swiss Direct Drive (Ender 3 x)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This piece, attached to the x-carriage, allows for better cable management combined with a drag chain.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 199
- Wydruki
- 0
- Wyświetlenia
- 1562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
For my Micro Swiss Direct Drive Extruder I had re-modeled a wider cable holder to accommodate all cables running from the extruder to the mainboard.
To use it in combination with a drag chain (https://www.thingiverse.com/thing:4671124) I remixed it an added a connector for the chain on the top.
Additionally, I designed also a special stepper cover for the x-gantry which allows to run the cables inside the cover and detour them to the back, without the cable restrainer from the original design.
Print Settings
Supports: No
Resolution: 0.2
Infill: 20%
Filament:
any PLA any
If you like my stuff then please leave a 👍 and post a make. Thanks!