1 / 2
Sanding Block 25mm - with 3d printed screw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sanding block for 25mm sanding paper. Pls. see credits!
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 467
- Wydruki
- 7
- Wyświetlenia
- 1398
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 7) (Komentarze: 7)Remiksy (0)Kolekcje (54)Powiązane
The sanding block by skroob is a really cool tool - but i didn't have the right screws. So i borrowed some from the "nut job" design :)
Please note that the screw is a loose fit by purpose -> this is because how some slicers are handling outer diameters and because some printers' extrusion tends to be problematic with small gaps. If you feel uncomfortable with this loose fit, enlarge the screw by 1-2% in x/y direction.