Belkin Pro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple minimalist mount that can be used to securely hold a Belkin Pro Lightning USB-C Dock in place.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 308
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Preface
First things first this was built for the following dock. This will most likely not fit any other Belkin dock offering.
Instructions
This is a very simple print. Just print two of the brackets standing upright in order to avoid needing supports. I used a very small raft to print the model in the pictures, but it may not be needed.
4 small screws are required to fasten this to the underside of a desk.
3 walls and 30-40% infill is recommended, since this mount is going to be responsible for holding up a $350 mount that tends to get quite toasty.