Yaesu mounting bracket for 8800/8900/7800/7900 and others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 697
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or might not) have from Yaesu:
I highly recommend these screws for most radios: https://smile.amazon.com/gp/product/B01F5COC42
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
85%
Notes:
Highly recommend using very thick walls, enough perimeter shells that the sides are totally solid. I used these brackets to mount a radio to the wall of a trailer and it's been rock solid. A reasonable amount of force pulling on it did not cause it to break.
Category: Hobby