Fire Extinguisher Mounting - 10 lb, 4.5" dia, (115mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting for 10lb or 4.5" diameter fire extinguishers. The extinguisher snaps into the top clip and rests on the base.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Mounting for 10lb or 4.5" diameter fire extinguishers.
The extinguisher snaps into the top clip and rests on the base.
Print Settings
Supports:
No
Notes:
Print the bottom fairly solid near the wall as that is what is doing most of the work. I think i used 30 to 40% triangle infill.
The top clip part should be printed with enough perimeters to be solid on the clips. The infill can be 10 to 15%I printed both parts with .8mm lines and .32 layers to get it done reasonably fast. I did this with a .4 nozzle.
I printed some with petg and pla. I liked pla better for the top part as the extinguisher snapped in place more securely, but petg is fine. It isn't going anywhere on its own either way.
Category: Household