Tripod Mount For Mintion BeaglePrint Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple but effective mount for the BeaglePrint Camera for cam lock / latch style tripods
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 159
- Wydruki
- 2
- Wyświetlenia
- 2127
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the tripod adapter mount as seen in the video above. I designed this to work on these generic tripods with the cam lock / latch style mount. Some other designs with articulated arms cause the camera to move around slightly with printer vibrations and the timelapse footage is comprimised.
Simply remove the bottom cover of the Mintion BeaglePrint camera and replace with these parts as seen in the video.
No special print requirements. Standard PLA works well with 0.2mm layer height and 25% infill.
If you need to adjust the focal length of your camera, see this article here:
Other great resources related to BeaglePrint:
► https://www.3dprinteraccessories.shop/en-de/blogs/beagleprint
If you would like to pick up a BeaglePrint Camera check out the links below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):