1 / 1
Orange Pi 4B case — zdjęcie 1

Orange Pi 4B case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple case for the Orange Pi 4B w/ 30x10mm fan holder

Ocena
5 / 5
Polubienia
8
Pobrania
86
Wydruki
2
Wyświetlenia
594
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Simple case for the Orange Pi 4B with a spot for a 30x10mm fan. 

Can be printed without supports. It clips together through friction, no additional hardware is needed. M3 screws can be used if desired by replacing the bottom pillars.

Fan clips can be quite fragile, so handle with care when installing a fan. For me the friction from the mounting pegs alone was enough, the clips are more for precaution.

 

The model is a full rebuild from the one found here. It fixes some general issues like misalignment of the posts. 

Tagi