1 / 1
PTFE Bowden tube clamp fitting
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Your bowden is moving? Try this.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 217
- Wydruki
- 5
- Wyświetlenia
- 1173
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (38)Powiązane
This thing is better than the original metal fitting usually used. Having movement in the Bowden system causes inaccurate extrusion and is a common but often overlooked problem. You want zero movement of your bowden tube! If you have the slightest feeling that it is moving, it is.
For optimal results:
- Use high printing temperature to aid layer adhesion
- 100% infill
- Sand the outside of the PTFE Bowden tube and the inner sides of the clamp to get better grip between them.
- Use this trick in addition to the clamp to get even more stability.
- Tighten the nut as much as possible without breaking it
Ps: im not the original author. I was not able to find the source on Thingiverse, so i decided to upload it. If you are the creator, let me know if i should do something.