Badge Holder with RSA and Yubikey
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ID Badge holder that can also securely hold RSA and Yubikey
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 233
- Wydruki
- 1
- Wyświetlenia
- 1601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This will hold an ID Badge and an RSA and Yubikey
The Yubikey fits securely but can easily be removed by pushing up from bottom. Also has accommodation for a yoke to go through Yubikey.
If you prefer a less snug hold on the Yubikey, insert it with the “Y” button facing the holder.
For printing, print upright but add a large brim (3-5 mm or more) to the bottom to hold it securely, once it reaches 4 CM or so, it can run the risk of being pulled over.. It is tall and thin, and can be pulled over by a fast moving print head once it gets to the height of the RSA holder
Prints nicely with PLA or PETG