1 / 1
Drop ceiling cable/wire holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple clip with a hook that friction fits on the standard drop ceiling rails inside the roof.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
A simple clip with a hook that friction fits on the standard drop ceiling rails inside the ceiling. Useful when you want to route cables in there. You can secure the wires with a zip tie to not come out. The design can be printed without supports (vertically) if you have good bed adhesion. I printed it with supports on the side just to be safe and for better strength. The hole in the side is sized to fit a standard CAT5E cable but thicker ones can be squished in as well.