Vase pinapple like
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vase with pinapple structure. Solid 3D model. 1 Final Model printed / tested. 5 Test models not printed / tested.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi
I tried some CAD functions and the the result was another vase.
Although my aunts and grandmas already have tons of plastic in their living rooms…
I present you here an new one !! *hurray
There is 1 final model I printed and 5 sample mods that came with CAD progress.
Some of the “SAMPLE MODS” might have overhang. I did not test them yet.
Print instructions:
1. Scale the model to fit your printer, I scaled X,Y=0.8 and Z=0.75
2. make 3 solid bottom layers.
3. I printed it in VASE mode with high wall thickness / layer width of 0.65mm on my 0.4mm nozzle.
4. Some overhangs are there. With PETG I found out that a rather high temperature reduces warpage. (260°) And Cooing was at 50% only.