Dyson V11 Attachment holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 types of holders for Dyson V11 attachments and probably other Vs as well
- Ocena
- 4,75 / 5
- Polubienia
- 51
- Pobrania
- 336
- Wydruki
- 9
- Wyświetlenia
- 1407
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The idea and design was somewhat inspired by
https://www.printables.com/model/29577-dyson-v11-wall-bracket-for-accessories-wandhalteru%2Fcomments
I had a few things about it that didn't fit my needs so I made my own. All of them are hung with 2 drywall screws, except V3 uses 1 drywall screw and 1 pan head screw. They are designed to be made out of PLA as they have the recycle logo. PLA is strong enough and for indoor use temp should not be a problem. There are 3 types.
V1 = will hold 2 attachments. 1 of the attachments can be a power type that needs a plug (see the 4th pic) it sticks out farther from the wall also.
V2 = Holds 2 and is close to the wall (the middle one in the main picture)
V3 = is at an angle and only holds 1. Its for the odd shaped brush (on left in main picture or see 5th pic)