Anycubic i3 Mega E3D v6 Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I upgraded my Anycubic i3 Mega with an E3D v6 clone of very good quality (http://s.click.aliexpress.com/e/bqbS2KS9). I…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I upgraded my Anycubic i3 Mega with an E3D v6 clone of very good quality (http://s.click.aliexpress.com/e/bqbS2KS9).
I started following the guide of steddyman (https://www.thingiverse.com/thing:2539301/files).
Unfortunately the dimensions of my clone does not fit the clone mentioned in the guide. So I just used the Bowden Support ond designed the rest by myself.
The left cover fits the original fan. The fan is positioned a bit lower (1mm) to get better airflow around the hotend-sock.
You just need 4 longer M3 screws to fix the heat sink with the adapter ring. The left cover is fixed with 2 M3 nuts and original screws.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
60%
Filament: Anycubic PETG gray
Category: 3D Printer Accessories