Hydration Reservoir Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made own hydration reservoir dryer. It fits 2L, 3L reservoirs and many other reservoirs with 12cm+ opening. No more…
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made own hydration reservoir dryer. It fits 2L, 3L reservoirs and many other reservoirs with 12cm+ opening.
No more mold + cool look in your kitchen! :]
Recommended print settings:
- flexible filaments like Nylon or ABS
- at least 2.5mm walls for HRD_part1.stl for better layer adhesion (stiff plastics can break!)
- no supports
Assambly:
HRD_part1.stl - print twice
HRD_part2.stl - print once
HRD_part3.stl - print once
Glue together part1, make sure that they are aligned. Put M4 nut into slot on part2 and screw together part1 and part2 with 35-40mm M4 screw. Glue dryer to the base (part3).
Print Settings
Printer:
V-king
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
20%
Category: Sport & Outdoors