Salt and Pepper Shaker Stand with Handle--OpenSCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design provides parameters to adjust for size of the shakers, wall thickness, stand height, and handle height
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 278
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I designed this to contain the pepper flakes that always were falling out of the pepper grinder onto the table.
The OpenSCAD model is included in case you need to adjust for your shaker/grinder and have other preferences for other dimensions.
The handle is integral to the print so its height has to fit within your printer volume. My print was done with wood PLA to more closely match the wooden shaker and grinder. The settings were the standard 0.3 mm Draft setting as the added texture is fine for a wood-look. No supports were required and 20% infill was used.