Subaru Oil Filter Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oil filter wrench for my 2013 Outback
- Ocena
- 4,75 / 5
- Polubienia
- 59
- Pobrania
- 237
- Wydruki
- 4
- Wyświetlenia
- 1380
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this so I could more easily remove the oil filter on my Outback during oil changes.
This fits subaru filter # 15208AA15A
I printed in PETG (cuz it stays in my hot AF garage in TX) with the following settings:
2.5mm LH , Arachne auto-width , 5 perimeters , 6 top&bottom layers , 12% infill.
The wrench fits quite snuggly. If your printer needs more than 0.1mm clearance try printing just the 1st 5 layers or so to check the fit before printing the whole thing.
If you'd like to cusomize this to fit your own oil filter the model is at OnShape here. You can just modify the dimensions, etc in the sketch to make what you need.