Arducam Case Housing with GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of these two files https://www.thingiverse.com/thing:5181195 https://www.thingiverse.com/thing:4840491
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
https://www.thingiverse.com/thing:5181195
Print Settings
Printer:
Ender 3 v2
Rafts:
No
Supports:
Yes
Resolution:
.1
Infill:
36
Filament:
Polymaker Polylite ASA
Black
Notes:
I cobbled this together to make this work with this make;
This could be printed with .2 resolution I went with .1 as that is what the Polymaker website recommended this filament be printed at.
I would recommend supports and set to touching build plate. Since this was ASA (warps pretty easy) I used a brim, PLA would most likely not need a brim unless there's poor bed adhesion.
Category: 3D Printer Accessories