Raspberry Pi Zero W Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple ball & socket articulated mount system.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to be used with medium size 3M Command Strips. Although the plate looks smaller than the Command Strip, it is designed to fit the adhesive area of the "red" side (not "wall" side) of the strip.
System was designed to provide a clean way to mount the Raspberry Pi Zero W in it's new case as a camera. Sockets place enough tension on the joints to support a Raspberry Pi Zero's weight, but not a whole lot more.
Socket plate includes a small cable holder.
Recommend printing with a good brim so the connecting rod remains stable during vertical printing.