Just a box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a box with a TPU seal and a clasp to keep it closed. ¯\_(ツ)_/¯
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a box I made a while back as a modelling exercise. It comes with a TPU seal and a clasp to keep it closed.
The photo is printed with clear PETG and blue TPU with a 0.4mm nozzle. The walls are 0.8mm thick.
No support should be needed. STEP files are included if you need them to make some changes to suit your need.
3 M3x30 and M3 nuts are used as hinges.
Just in case you are curious about how effective the seal is, so was I. I filled it with water to find out how fast the water would leak out. The TPU seal slowed the leak from a stream to a slow dribble. It probably won't survive submersion but a few splashes should be fine.