Waterproof(ish) Box o' Things
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waterproof(ish) box for things. Latches on all sides for the best possible lock down. Customizable CAD.
- Ocena
- 5 / 5
- Polubienia
- 199
- Pobrania
- 359
- Wydruki
- 2
- Wyświetlenia
- 4341
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The CAD is parameterizable but you may need to merge extra latches or adjust the extrusions if you do decide to modify things. I've found that adjusting the parameters for size you have to go into the latch sketch to adjust the height offset, simply editing and hitting enter is enough - no idea why.
Assembly:
- Top (support to build plate)
- Bottom
- LatchMiddle * 4
- LatchOuter * 4
- A few lengths of filament to make up the latches and a length of tpu for the seal.
Latch Assembly:
For assembly of latches put a filament into the middle latch and then mount the outer latch and put a filament through.
The animated gif below may help.
voron-parts/BoxOfThings3_v36.gif at main · richardjm/voron-parts (github.com)
