1 / 16
Modular Magnetic Dog Tock Board Game for up to 8 Players — zdjęcie 1
1 / 16

Modular Magnetic Dog Tock Board Game for up to 8 Players

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The tiles can be configured for any of 2 to 8 player modes. Game rules can be found here:…

Ocena
0 / 5
Polubienia
23
Pobrania
81
Wydruki
0
Wyświetlenia
713
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The tiles can be configured for any of 2 to 8 player modes.

Game rules can be found here: https://en.wikipedia.org/wiki/Tock

To build this model, you will need:

  • 32x cylindrical rare earth magnets 3x8mm
  • 28x countersunk M3x8 screws
  • 2x packs of regular playing cards
  • Multiple colours of filament depending on the number of players to cater for

I used black for the outer tile shells, white for the regular "squares" and transparent for the card container box. For the player tokens and home/starting areas I used red, blue, yellow, green, orange, purple, turquoise and tan.

For the card box I used this customizable model: https://www.thingiverse.com/thing:2404395

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

No

Resolution:

0.32

Infill:

25%

Filament: Any PLA Various


Notes:

I used a 0.6mm nozzle to speed up the printing process. Probably a 0.8mm nozzle would do too since there is not a lot of detail.

Category: Games

Tagi