Stackable Upgradeable Vertical Axis Wind Turbine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This designed was inspired by the wind turbines in the Dyson Sphere Program video game. It uses partly 3D printed…
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 225
- Wydruki
- 0
- Wyświetlenia
- 3008
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This designed was inspired by the wind turbines in the Dyson Sphere Program video game. It uses partly 3D printed bearings and is meant for decorative purposes, although it can be attached to a magnetic rotor to generate a modest amount of power. The design is stackable and allows for later upgrades, with each added segment twisting by 10° in order to complete a triple helix. The Darrieus blades have small holes in the edges to allow the use of bits of 1.75mm filament as dowels to strengthen the bond between segments.
A video of the VAWT in operation can be found here: https://youtu.be/tNboyPBhghc
The following parts need to be printed for every segment:
1x Inner_35mm.stl
2x Outer.stl
1x BallCage.stl
1x Stopper.stl
1x OuterSpacerMk4.stl
3x SpokeMk4.stl
3x DarrieusBladeMk4.stl
Apart from the PLA, the model also requires the following parts for every segment added:
3x M3x40 countersunk screws
3x M3x16 round head screws
6x M3 nuts
6x 11mm stainless steel balls
The following are only needed once, irrespective of the number of segments:
34mm steel pipe for the mast
1x M3 Nut
1x M3x50 screw for the stopper.
Author's 3D printing Facebook page: https://www.facebook.com/3DPrintNoob
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
varies
Infill:
20
Filament:
any PLA
Notes:
Rafts are not required but are highly recommended. If the parts are printed in the default orientation, only the Darrieus blades require a minimal amount of supports, set to "touching the bed only".
Category: Sculptures