Contra-rotating Wind Turbine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can add as many turbines as you like and set them to rotate in any direction you want. The included brackets are…
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 189
- Wydruki
- 1
- Wyświetlenia
- 1580
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
You can add as many turbines as you like and set them to rotate in any direction you want. The included brackets are designed for 34mm pipes, but you can use zip-ties to attach the shaft to a pole.
You can see it in action here:
Parts required:
Turbines:
1x 8mm threaded rod 50cm+
2x 608 bearing for every turbine
3x M3x20 screws per turbine
2x M8 lock nuts per turbine
Vertical shaft barcket:
2x M8 nuts
2x M8 lock nuts
2x M8 washers
4x M3x20 screws
4x M3 nuts
4x M3 washers
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
You can use a 0.8mm nozzle and a 0.4mm layer height if you want to print faster.
Category: Outdoor & Garden