Yard Light Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I placed a couple of outdoor landscape lights around my house with LED Bulbs.The bulbs are 50 watt equivalent and are…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I placed a couple of outdoor landscape lights around my house with LED Bulbs.The bulbs are 50 watt equivalent and are 64mm/2.5in in diameter that I bought at Lowes. I needed a shroud for them so they did not glare through the bushes. This was done in TinkerCAD. This shroud snaps on the bulb rim and stays tight. I placed a hole if you want a screw and nut to affix it more firmly. I printed mine in PLA and I will see how they stand up to the weather. They can probably be resized to fit other bulbs.
Print instructions
Category: Outdoor & Garden Print Settings
Rafts: No
Supports: No
Resolution: 0.4mm
Infill: 10%
Notes:
in Hatchbox 1.75mm Black PLA on my Printrbot Simple Metal