Scale base for load cells
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a base for creating a scale based on 4 load cells and an HX711 AD Converter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 977
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a base for creating a scale based on 4 load cells and an HX711 AD Converter. I use this as a base for my beer kegs so I can measure how much beer is left. You can probably use this for other purposes as well. There is also room for a DHT22 temp/humidity sensor in the base.
In this version I place the HX711 outside the base and use a network cable between the base and my hx711/arduino.
I made the base to fit a Cornalius Keg of 18/19 liters and a round one would not fit the pursa printer… so thats the reason for the odd shape.