PanzerJagerWagen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1/100 scale model of a German WWII railcar from an armored train. These cars were used as the second car in the train.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 908
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 1/100 scale model of a German WWII railcar from an armored train. These cars were used as the second car in the train. It would push an empty flatcar ahead of it to set off mines and it would be followed by a special car carrying a small tank. That car had a built in ramp in the front that fit under the sloped edge of this car. That car will be my next release.
You will need to add the panzer IV turret with the schurzen armor. I recommend the one from Bergman's excellent 1/100 set here.
https://www.thingiverse.com/thing:769137
Use the 1-100 pz4g turret l43 schurzen solidbracket1.STL file
Print instructions
Unassociated tags: 1/100 scale
Category: Vehicles Print Settings
Printer Brand: Printrbot
Printer: Play
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.1mm
Infill: 25%
Notes:
I added supports between the wheels on the bottom of the car to help the wheels print. You can cut them off.